If your socket set is limited to one drive size, choose 3/8-inch drive to cover the majority of sockets you will use. The smallest and largest drive sizes are very useful too, though. Small, ¼-inch drive sockets can sometimes reach small nuts or bolts in tight spots more easily.
Just so, What are the three different size ratchets?
Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.
Do you need 3/8 drive sockets? It really depends on what equipment you need to install or remove bolts. For general purpose use, I would get a 3/8″ drive set. If you are going to do a lot of work on automotive engines, you will need both a 3/8″ and a 1/2″ drive set. A 1/4″ drive socket set is normally used on more delicate and smaller fasteners.
Similarly, Can I use impact sockets for everything?
Impact sockets can be used safely on a hand tool, however you should never use a regular hand tool socket on an impact wrench as this can be extremely dangerous. A regular socket is likely to shatter when used on power tools due to their thinner wall design and the material they’re made from.
How many teeth should a good ratchet have?
Fine, or high-tooth-count, ratchets range from about 72 teeth to 160 teeth. Now, tool manufacturers can create these high-tooth-count ratchets a few different ways. You can obviously machine more teeth onto the drive gear or you can add more pawls.
Are quick release ratchets weaker?
Ratchets with quick release mechanism. … Ratchets without quick release mechanisms still have ball detent retention mechanisms, but require more pulling to remove a ratchet. Those with quick release mechanisms might have stronger retention, until you press that release button even just a little bit.
What are the 4 socket drive sizes?
These drive fittings come in four common sizes: 1⁄4 inch, 3⁄8 inch, 1⁄2 inch, and 3⁄4 inch (referred to as “drives”, as in ” 3⁄8 drive”).
What is a 3/8 socket in MM?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 3/8″ | 0.375 | |
| 10mm | 0.394 | |
| 13/32″ | 0.406 | |
| 11mm | 0.433 |
• Apr 29, 2020
Why are there different size socket drives?
Because of their versatility, nearly all screw and bolt types now have sockets of different types made to fit their bolts or nuts. Sockets often come as a “socket set” with many different sizes or types of sockets to fit the heads of different-sized fasteners.
Are 6 or 12 point sockets better?
Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.
Which socket drive size should be used on large bolts or lug nuts?
Size of the lug indicates drive size of the socket wrench. inch lug is used for very small fasteners, inch lug is used for medium size fasteners and inch fasteners is used for larger bolts and nuts.
Why are impact sockets black?
Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.
Is it OK to use impact sockets with a ratchet?
Can I use an impact socket on a hand ratchet? You can absolutely use an impact socket on a hand tool ratchet, a breaker bar or a torque wrench without damaging the tool or placing yourself at risk. New impact sockets are designed with a shoulder that is stepped down to a parallel neck.
Can you use impact sockets with a torque wrench?
Re: Impact sockets with torque wrench? It doesn’t matter at all. Torque is torque, as long as the bolt is reaching the spec the material doesn’t matter. You could use a plastic socket if you wanted, but obviously it would break.
Are 72 tooth ratchets good?
The main reason why a 72-tooth ratchet will be the better call for the vast majority of applications comes down to the issue of durability.
Is snap-on Made in China?
Only certain Snap-On tools are still made in the USA. Most hand tools are still made in their facilities in Milwaukee and other U.S. manufacturing locations, but products like their cordless power drill kit are made in China, among other countries.
Is more teeth on a ratchet better?
Ratchet Tooth Count
The higher the tooth count, the less the handle has to move to engage the next tooth. That means if you’re in a tight situation you’ll be able to take things apart that you might not be able to with a ratchet that has a larger swing arc.
How many teeth do Craftsman ratchets have?
Drive Iconic 36 Tooth Ratchet.
What is ratchet tool?
A ratchet is a common wrench device with a fastener component. A ratchet wrench is an essential tool that is used to fasten or loosen nuts and bolts.
How do I know what size socket I need?
How to Determine the Right Size Socket for a Nut
- Turn on the digital caliper and set it to read in inches, not millimeters. …
- Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
- Check the caliper display. …
- Turn on the digital caliper and set it to read in millimeters, not inches.
What is standard socket drive size?
Drive Sockets
There are 5 different sizes of ‘drive socket’ that are commonly used: 1/4″, 3/8″, 1/2″, 3/4″ and 1″. The smaller the drive is, the smaller the head is likely to be as well. There are two main reasons for this.
What size is a 3/4 socket in MM?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ |
• Apr 9, 2020
