# How do you make a hanging light post?

1. Step 1: Mix Concrete in Barrel. The concrete should fill about 1/2 to 3/4 of the barrel to provide enough stability for the posts. …
2. Step 2: Insert and Support Post. …
3. Step 3: Add Drainage Holes to Planter. …
4. Step 4: Fill With Gravel, Soil + Plants. …
5. Step 5: Add Hooks. …
6. Step 6: Enjoy.

Just so, How do I string lights across my backyard?

How do you make a PVC light post?

Similarly, How do you string lights around a column?

## How high should you hang outdoor string lights?

For most string lights, about eight to 10 feet is perfect. If you have larger bulbs, you may want to hang the lights a little higher.

## How many feet of string lights do I need?

The good news is that you don’t need complex math to solve this problem. Simply buy string lights that are 2 to 6 feet longer than your linear measurement to create the swag of your choice. It’s always better to have more string length than you need because you can always shorten it by doubling it up on the ends.

## How do you hang string lights outside without trees?

7 Ways on How To Hang String Lights in Backyard Without Trees

1. Hanging Lights on 4X4 Posts.
2. Using Metal Pole and PVC. …
3. Along the Fence Lighting.
4. Deck Lighting.
5. Gazebo or Pergola or Covered Patio String Lights.
6. String Lights on Umbrella.
7. Use Planters to String Backyard Lights.

## How many feet of light do you need to wrap a column?

column, we’d need 60 feet of lights in order to wrap the strands 3 inches apart. Your results will vary depending on the height and circumference of your column or tree trunk.

## How do you light a column?

The Top 5 Ways to Illuminate Columns

1. Up Lighting. An up light is a fixture that is positioned at the base of the column and shines light upward. …
2. Soffit Lighting or Recessed Lighting. …
3. String Lighting. …
4. Wrap Lighting. …
5. Wash Lighting or Flood Lighting.

## How do you hang string lights without holes?

Using Hooks

If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.

## Can you leave string lights out in winter?

Yes you can leave them in freezing weather. If its windy youy may have to replace a few bulbs.

## Should I get fairy lights or LED lights?

In terms of maintenance, LED lights are the better option. They’re made with plastic bulbs, rather than glass, so there’s far less chance of the bulbs shattering or breaking and they don’t need to be handled with quite as much delicate care as standard glass Christmas lights.

## How many feet of lights do you need for an 8 foot tree?

“A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe’s. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree’s height. And Real Simple suggests 100 lights for every foot.

## How do you calculate the length of a string light?

Length: The best way to estimate the length you’ll need is to use twine as a stand-in, stretching it from point to point exactly where your lights would go. (Don’t forget to include enough to reach the outlet.) For columns or trees, measure once around and multiply that by how many times you’ll wind your light around.

## Why are string lights so popular?

Low power consumption. One other reason why people are so into string lights is that they consume very little power as compared to functional lights. … As well, string lights are manufactured using energy-efficient LED light, which uses up to 70% less energy and lasting about 10 times as long as common incandescent bulbs …

## How can I light my backyard at night?

14 Lighting Ideas for the Perfectly Bright Backyard

1. Mix Up Different Lighting Styles. …
2. Uplight Trees to Create a Moonlight Effect. …
3. Illuminate Walkways. …
4. Sprawl Light Orbs Across the Fence. …
5. Light Up Water Features. …
6. Plant Tiki Torches. …
7. String Lights Up Tree Trunks and Branches. …
8. Create Shadows with Spotlights.

## How do you hang outdoor string lights on a screened porch?

1. Step 1: Select Anchor Points. Lay string lights around the perimeter of your deck. …
2. Step 2: Install Screw Eyes. Predrill holes into the wood structural supports in your marked locations. …
3. Step 3: Attach String Lights with Carabiners. …
4. Step 4: Install Light Bulbs. …
5. Step 5: Attach String Lights to Power.

## Can I use PVC pipe to hang string lights?

It can be a little tricky when hanging lights on a slope. You will want to dig an 18″ hole and then place a PVC Pipe into it. Just make sure it goes below the grass line. … We used a level to help guide the pole around and make sure it was straight up and down.

## Can you cover a lamp post?

Slip Over Sleeve

Not only does it dress up and beautify your existing lampposts, but also it reinforces the post with the strength and durability of resin. … Resin does not corrode, and it’s non-porous and non-hydroscopic so once it is in place, the elements will not get in.