A round front bowl generally has a dimension of approximately 16.5″ from the seat bolt holes to the tip of the bowl. An elongated bowl is approximately 2″ longer, or about 18.5″. (Note: these dimensions can change from manufacturer to manufacturer, but there is almost always about a 2″ difference between the 2 sizes).
Just so, What is the lowest profile RV toilet?
The Dometic Ceramic RV Toilet 311 Series has a low-profile seat height of 13-3/4 inches. It features a revolutionary PowerFlush technology and a full-size ceramic bowl to deliver the comfort and beauty of a residential toilet.
How do I know what toilet seat to buy?
Similarly, Can I put a round toilet seat on an elongated toilet?
Can I Install A Round Toilet Seat On An Elongated Toilet? While you can install a round toilet seat on an elongated toilet, it isn’t recommended. A round toilet seat will not fully cover the toilet bowl rim of an elongated toilet leaving the rim exposed.
How do I know if I have an elongated toilet?
You can determine the shape by measuring the distance from the back of the toilet bowl to its front edge. Here’s how you do it. If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat.
Are all elongated toilet seats the same?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. … There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
Do all toilets fit the same?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Is wood or plastic toilet seat better?
Choosing a wood vs. plastic toilet seat depends primarily on personal preference. Wood toilet seats stay warmer and are more comfortable, but can be hard to clean. Plastic toilet seats are easier to keep clean and are more versatile, but can be uncomfortable, especially in the winter.
What’s better elongated or round toilet?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
Is my toilet too small for a bidet?
In most cases, you will need 3 inches or 7.6cm for a Round toilet and 2 inches or 5cm for an Elongated toilet for a Bidet Toilet Seat to fit. This area should be flat and not have any curvature or sloping up. Most two-piece toilets will have 3 to 4 inches or 7.6cm to 10cm.
Are all elongated toilet seats the same size?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. … There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
What is the standard toilet size?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
What are common toilet seat sizes?
Typical width: 14″ – 14-1/2″ Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″
Does toilet seat have to match toilet?
As a general rule, match elongated seats to elongated toilets and round-front seats to round-front toilets. However, before you make your final choice, you will want to be certain that your toilet seat is compatible with your toilet in terms of size, style and color.
How do you measure toilet seat height?
Toilet height is measured from the floor to the top of the rim. Whether it’s marketed as “chair height,” “comfort height,” or “tall height,” the best toilets to buy for your bathroom should have a rim height that makes it easy to sit down and stand up.
How do I know if my toilet is 10 or 12?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
What does 12 rough-in mean for toilet?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.
How much should it cost to have a toilet installed?
On average, a standard toilet installation costs between $120 and $230 with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $100 to $200 for a total toilet replacement cost of $221 to $427.
What is standard toilet seat size?
Typical width: 14″ – 14-1/2″ Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″
How do you measure a B&Q toilet seat?
Measure from your toilet seat fixing point to the lip and then the width to find the dimensions needed for your new toilet seat.
