Curtain rods are available in a variety of lengths. The most standard sizes you’ll find in stores are 28-48 inches, 48-84 inches, 66-120 inches or 120-170 inches. These ready-made options cater to most common window sizes, but it’s best to purchase adjustable rods that can accommodate a broader range of window sizes.
Just so, Should curtain rods match light fixture?
You do not need to match metal finishes in your lighting, in your hardware, in your faucets, or curtain rods. One important trick here is to keep all your lightings, whether recessed can lights,pendants,or chandeliers,no more than 6 to 7 feet from each other.
Whats the longest curtain rod you can get? How Long Is the Longest Curtain Rod? The longest curtain rods readily available are 120″-170″ long; however, if you need longer rods, it’s pretty easy to DIY them. You can make your rods as long as 240″.
Similarly, How are drapery rods measured?
Which curtain length looks best?
How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.
Can you mix brushed nickel and oil rubbed bronze?
Mixing is fine. You do not have to match your light fixtures, plumbing and hardware.
Should your door knobs match your light fixtures?
To clarify—it’s not out-of-style to match hardware and lighting fixtures. Despite the aforementioned fluctuation in style-rules, it hasn’t gone so far that matching finishes is anywhere near faux-pas status. Here’s a rule of thumb: matching fixtures is a safe and proven method for tidying up a kitchen design.
How far apart should clip rings be placed on curtains?
I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.
Can you combine 2 curtain rods?
Some curtain rod manufacturers sell a curtain rod connector designed to fit inside the rod, allowing you to join two or more matching rods together to create one long piece. These inner tubes screw into place, requiring holes drilled at the ends of the curtain rod pieces to secure the entire structure together.
How wide can a curtain rod be without support?
For 1 3/8 Inch Diameter Wood Poles: Two curtain rod brackets are sufficient up to a width of 60 inches (5 feet). … Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
What is a traverse rod?
What are traverse curtain rods? Traverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.
How much wider Should curtain rod be than window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
What can I do with old curtain rods?
Curtain rods can also be utilized in the kitchen to act as utensil rods. Fix them above the stove, the sink or underneath upper cabinets and use S-hooks or rings with clips to hang utensils from. You can even use curtain rods to create a suspended pot rack, or butcher’s rack, over a table or central island.
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
Should drapes touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
Is it OK for curtains to drag on the floor?
Curtains that are dragging on the floor don’t look good either, can be a hazard, and collect dust more easily. How to fix it: Aim for the magic middle ground (literally)—curtains that hover just above the floor. To find the right curtain length, measure from the floor to where you’ll hang the rod.
Should sheer curtains touch the floor?
Floor-length sheers should end one to two inches above the floor if they are hung beneath another curtain. However, sheers can go to greater lengths if they stand alone. For a soft and romantic look, add an additional three to four inches for “breaking” sheers, or 12 to 15 inches for sheers that puddle.
Should my kitchen cabinet pulls match my faucet?
Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.
Do all fixtures in house have to match?
All your light fixtures and hardware finishes do not have to match throughout your entire home. Interior design is all about the expression of your personal tastes. Showcase your individual decorating style, whether you like things to match, complement one another or enjoy an eclectic look.
Should all light fixtures have the same finish?
Instead of strictly matching, light fixtures should coordinate throughout a home. That is to say; all light fixtures should not look exactly alike, rather share common features. It is possible to match the shape, color, materials, styles, and/or other details to achieve this end.
How do you use clip drapery rings?
How do you hide curtain ring clips?
HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.
