in

What is a ripple fold drapery?

What is a ripple fold drapery?

WHAT ARE RIPPLEFOLD CURTAINS? Ripple fold style curtains are curtains that have a consistent s- curve rippling across the span of the track. The ripples are created by carriers corded together to create that consistent wave. These styles are seen often in hospitality installations as hotels and banquet rooms.

Just so, How do you choose curtain hooks?

The curtain hook needs to be wider than the rod and leaving enough room to attach the curtains. Choose the size that will allow you to hang the curtains loosely, without leaving a large gap between the curtain rod and the top of the curtains. Curtain hooks are also used to hang shower curtains on a shower rod.

Is ripple fold drapery expensive? A Ripplefold drape is a single continuous panel produced with snaps sewed into the top hem. As the ripplefold drape is snapped into the hardware it creates an undulating wave pattern. … Price wise, ripplefold will be about 20% more expensive due to the hardware and installation cost.

Similarly, What is a Parisian pleat?

Parisian Pleat

A Parisian Pleat also known as the Euro Pleat is quickly becoming a popular choice with our clients since it has a more modern sleek looking finish. Similar in style to the French, the Parisian is simply pinched at the very top. The Parisian pleated headers allow drapes to flow with elegant ease.

What is a French pleat drapery?

The French pleat is a classic drapery heading also know as the three-finger pleat. It creates a sleek header for a curtain that controls fullness while allowing the curtain full functionality. The fullness is adjustable, depending on decor style, fabric choice, and functional requirements of the curtain.

Are metal curtain hooks better than plastic?

Metal Curtain Hooks

Our metal hooks are brass or zinc plated and are much stronger than plastic hooks for hanging curtains. Metal hooks are very strong, can be used in direct sunlight and are suitable for hanging heavy weight curtains.

What size drapery pins do I need?

What is the difference between pinch pleat and Ripplefold?

Ripplefold drapes are sewn flat and hemmed on all sides, snap tape, fabric that has snaps sewn onto it every few inches, is then sewn onto the heading. … Pinch pleat drapes work well with heavier, formal fabrics because of the nature of the design and the need to help conceal the hooks used to hang them on.

What is a Ripplefold traverse rod?

Ripplefold is a system started by the Kirsch company that uses a 1″ wide snap tape sewn along the top of a flat drapery panel. The snaps on the ripplefold snap tape are always 4 1/4″ apart for ripplefold drapes. … This is what holds the fullness in the ripplefold curtain and prevents it from pulling flat when closed.

What is pinch pleat?

Pinch pleat curtains are a highly decorative heading, drawing together lots of fabric into a tightly gathered and stitched bunch at the top. The permanently sewn-in pleats make for a smart finish, with elegant folds flowing from top to bottom.

Are pinch pleated drapes out of style?

Pleated panels are a classic style of drapery and so never really go out of fashion, although their popularity rises and falls with current trends. They look quite formal, so work best with formal or traditional decorating styles. … Pinch pleat is the most common style.

What is a Euro pleat?

What is the difference between French pleat and pinch pleat?

pinch pleat is the same as French pleat. Two prong pleats are good for showing off a patterned fabric and using more drapery rings. Grommets are casual and more modern. … Pleating to the top makes the drapery appear to be directly attached to rings.

How do you attach metal curtain hooks?

What type of curtain hooks are there?

Types of Curtain Hooks

  • Pin Hooks. A pin hook basically is a piece of folded metal wire. …
  • Sew-On Hooks. …
  • S-hooks. …
  • Clip Rings and Round Rings.

How do you use pinch pleat curtain hooks?

How do you pin a drapery hook?

Drapery pins (figure A) are inserted into the back (lining side) of the panels. The sharp, pointed end goes into the fabric. Insert the straight end of the pin all the way until it looks like figure B. The curved end of the pin will go through the eyelet of your drapery ring or rod carrier.

Is drapes out of style?

Modern types of window treatments have become more and more popular over the year. But, even though curtains are from the past, they will never go out of style. They are classic window coverings that can adapt to modern design and style. … This will allow us to continue to use curtains for generations to come.

Where do drapery hooks go?

What is fullness in drapery?

Fullness is the extra fabric used across the width or sometimes height of the drape. Fullness provides a drape with a richer look. … Using one and a half as many widths of the fabric used in a flat curtain yields a curtain with 50% fullness. Using 1.75 times more fabric yields 75% fullness.

What are pleated draperies?

Pinch pleated curtains and pinch pleated draperies have gathered fabric folds at top that create a custom made look, at affordable prices. Pinch pleated draperies work best with a traverse rod, the traverse rod moves the draperies when the cord is pulled.

Leave a Reply

Your email address will not be published. Required fields are marked *

Can the top bunk fall?

What is the most important furniture in your house?