Fluorescent to LED Conversion Kits
On average, an electrician charges $50-$100 an hour. Once the value of the electrician is added to the value of the LED conversion kit and LED bulb, the cost can be a bit high with an all-around amount of about $160-$506.
Just so, Can you mix LED and fluorescent tubes?
Many LED tubes are “plug and play”, meaning you can just install them like you would a fluorescent bulb. For this to be true, look for bulbs that are “ballast-compatible” meaning that they can use the ballast already installed in your fluorescent fixture to power the LEDs.
Can you replace 4 foot fluorescent bulb with LED? Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.
Similarly, Do you need an electrician to change a ballast?
Yes. As a matter of fact, you do need a lock out tag out device in place for changing a ballast. … ‘An electrician is replacing the ballast on a fluorescent light.
What is a good replacement for fluorescent lights?
The Best Alternative to Fluorescent Office Lights
- LED Lights Increase Office Safety. …
- LED Lights Dim Easily. …
- LED Lights Produce Less Heat Which Makes Cooling Your Office Easier. …
- LED Replacements Boast Extensive, Long Lifespans. …
- Fluorescent Lights Are Not Designed for Regular On and Off Switching.
Do LED tubes need a ballast?
No LED bulbs require a ballast, although some are engineered to work with an existing ballast. You will find ballast-compatible or “plug-and-play” LEDs that are designed to replace linear fluorescents, compact fluorescents, or HIDs.
Why do LED bulbs not work in some lamps?
There might be a couple of reasons why sometimes you cannot simply put LEDs in any old fixture. As mentioned previously, if an existing fixture has a dimming feature, and your new LEDs are not compatible. You will run into trouble with dimming capability, such as flickering or strobing or incomplete dimming.
What does T8 stand for?
What does “T8” mean? The “T” designation in fluorescent lamp nomenclature stands for tubular — the shape of the lamp. The number immediately follow- ing the T gives the diameter of the lamp in eighths of an inch.
Do I need to remove ballast for LED lights?
A plug and play LED is a fixture where you can install LED bulbs to what was once a fluorescent bulb. This is an easy solution and requires minimal effort on your part. Since it works with the existing ballast, there is no need for rewiring or ballast removal.
Are T8 and T12 LED bulbs interchangeable?
T8 tubes are simply 1 inch in diameter versus the 1.5 inch diameter of T12 tubes. In an effort to make LED tube lights compatible with the internal dimensions of most fixtures, you will find that most LED tube lights feature a T8 or 1 inch diameter. They can indeed be used in T12 fixtures.
Can you replace a ballast yourself?
The ballast takes in electricity and then regulates current to the bulbs. … You can get a new ballast at a hardware store or home center and install it in about 10 minutes. However, buying a ballast can be expensive, so consider pricing a brand-new fixture for comparison.
How do I know my ballast is bad?
If your fluorescent lighting is displaying any of the signs below, it could be a symptom of a bad ballast:
- Flickering. …
- Buzzing. …
- Delayed start. …
- Low output. …
- Inconsistent lighting levels. …
- Switch to an electronic ballast, keep lamp. …
- Switch to an electronic ballast, switch to a T8 fluorescent.
Why are my fluorescent lights flickering?
If your fluorescent bulbs flicker, most likely the problem is with the bulb itself. If the bulb is very dark on either end, it may be defective and burned out. The best way to test the functionality of a bulb is to put it into a fixture you know works. … Flickering fluorescent lights can also be a result of temperature.
Are LED tubes brighter than fluorescent?
The LED tube lights are noticeably brighter than fluorescent tubes and you don’t get exposed to any kind of harmful rays such as UV/IV rays as well that can damage your eyes and can result in skin allergies as well.
Can a T8 tube replace a T12?
The easiest and lowest price option to replace a T12 is a T8 linear fluorescent. They have become the go-to option for pre-existing T12s. If you still have magnetic ballasts, switching to a T8 will require a ballast swap.
What is T8 vs T12?
The main difference between T8 and T12 tubes is the tube’s diameter. T12 tubes are 1.5″ in diameter while T8s are just one inch. All other things—socket sizes, lengths, distance between pins—are the same. T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine.
Can you still buy fluorescent tubes?
While the discontinued products may no longer be manufactured, they can still be sold until existing supplies are gone. In the meantime, consumers are likely to pay a premium for the lamps themselves, but also more in utility costs because these technologies use more energy.
Can a plug and play LED bulb be used without a ballast?
1. Plug-and-play or direct fit linear LED (UL type A) A plug-and-play, or direct fit, linear LED is probably what you’re imagining – a simple, one-for-one swap out of the original linear fluorescent lamp. This lamp works directly with the existing fluorescent ballast, so there is no rewiring or ballast change required.
Can a fluorescent light work without a ballast?
Reverted question “ Can I make a fluorescent light work without a ballast?” yes, you can, but you need something to reduce the current as the bulb warms up. So, you can drive a fluorescent with a pulse width adjustable power supply, but this is what is in an ‘electronic’ ballast.
Can I bypass the ballast for LED lights?
Since LED lights work on low DC voltage, they need a driver. Most T8 LED tubes do not need a ballast. So, if you are going to install a T8 LED tube light, it will require a ballast bypass unless you choose a ballast compatible T8 LED tube.
Why do LED bulbs burn out so fast?
The most common reasons for LED blowing out are high voltage, bad contacts, use of incompatible dimmer switch, or recessed lighting. Other causes include overheating due to not using the right fixtures, or simply a bad batch of lightbulbs!
Why are LED lights bad?
A 2012 Spanish study found that LED radiation can cause irreversible damage to the retina. A 2019 report from the French Agency for Food, Environmental and Occupational Health and Safety (ANSES) warned of the “phototoxic effects” of blue light exposure, including an increased risk for age-related macular degeneration.
Why do my LED lights still glow when off?
In contrast to incandescent bulbs or halogen lamps an LED lamp has a high resistance due to the integrated power supply unit. The serial connection of the glow lamp closes the circuit even when the switch is turned off. As a consequence a low voltage drop appears to the LED driver so the LED still lights up weakly.
