To measure the depth of your current toilet, measure from the front edge of the toilet bowl to the back of the tank. If you are comfortable with your current toilet’s depth, then select a new toilet with a similar depth.
Just so, What is a water closet in a house?
Definition of water closet
1 : a compartment or room with a toilet Confronted with the cramped confines of a bathroom in a typical starter home—one of those spaces aptly described by the term water closet—homeowners may well entertain grand plans for expansion.—
Are toilet bases standard size? As with rough-in standards, make sure your space will accommodate an elongated bowl before you shop. The bowl height is generally 14 to 15 inches high measured from floor level (without the seat). Taller bowls are available in the height of a standard chair (16 to 19 inches) for comfort and accessibility.
Similarly, Can you replace a 12 inch rough-in toilet with a 10 inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
Are all toilet depths the same?
The average depth of a toilet sold in the US is between 28 and 30 inches. Many shorter toilets are described as “compact”. However, the compact toilets are often 26 to 28 inches in depth. While that is smaller than the average, it still may not be enough for your tiny bathroom.
What’s the smallest a water closet can be?
“If it’s not an ADA-necessary water closet, they can be as small as 3′ x 5′,” she says. But when they’re too small, they might make the user feel claustrophobic. Another concern is that water closets can sometimes take up valuable space that could be used for something else.
What is the minimum size of a water closet?
The IRC says the minimum width from the centerline of the toilet to the nearest cabinet or wall is 15″, making 30″ of wall space an absolute requirement for your toilet. It also mandates that you have 21″ clear in front of the toilet.
What does water closet look like?
In many cases, water closets will literally look like little closets inside a bathroom with a closing door or a sliding pocket door. There will be just enough room for the toilet and a paper roll unless it’s fancy, in which case there may be a sink in there as well. Some water closets have no door at all.
Can any toilet fit?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
What is the width of the base of a toilet?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches.
How far from the wall should a toilet rough-in Be?
In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.
How far from the wall should a toilet flange be?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
Are all toilets 12 in rough-in?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
What is the smallest water closet?
Compare with similar items
| This item GALBA Small Toilet 24.5″ Long X 13.5″ Wide X 28.5″ High Inch 1-Piece 24″ 25″ Short Compact Bathroom Tiny Mini Commode Water Closet Dual Flush Shortest Projection Elongated Concealed Trapway | |
|---|---|
| Price | $51995 |
| Sold By | TinyBathrooms |
| Item Dimensions | 24.5 x 14 x 27 inches |
| Item Shape | Elongated |
What does 12 rough-in mean for toilet?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.
Does a water closet need a window?
Whether you’re building a new home or planning a bathroom renovation, one question you might encounter is, “Does a bathroom need a window?” The short answer is yes. It’s absolutely crucial that your bathroom has some type of ventilation to remove unwanted moisture.
Do water closets have sinks?
A three-quarter bath is a water closet plus a sink and a shower whereas a bathroom includes a sink, a toilet, and a bathtub with a shower. Travelers abroad will notice signs for a “washroom” or “W.C.” for “water closet” when signifying a bathroom in English-speaking countries.
How much space do you need for a toilet in CM?
Minimum sanitaryware sizes
The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
How deep is a water closet?
If a wall mounted water closet is used, the depth of the stall is required to be a minimum of 56 inches (1420 mm). If a floor mounted water closet is used, the depth of the stall is required to be a minimum of 59 inches (1500 mm).
What is the minimum size for a half bathroom?
Half Bath Dimensions
A half bath needn’t be large. You will have enough space if you can find a spot in your house that’s about 3 to 4 feet wide and 6 to 8 feet long. If it’s any smaller, it will be uncomfortable for people to access.
What is the standard size of a toilet room Australia?
A length of between 1200 and 1500mm is usually sufficient. If you’re creating a separate toilet room, you’ll need to allow for more space. The standard door width in Australia is 820mm plus and architrave and wall space either side, so it’s likely you’ll want the room to be at least one metre wide.
