We recommend that wardrobes are fitted at 660 – 670mm deep (overall) from the back wall to the front of the top track, this is considered to be an optimum depth for sliding wardrobes. The minimum depth should not be less than 610mm overall. Below this depth, normal use will be impaired.
Just so, How do you measure the depth of a wardrobe?
Are you looking to elevate your bedroom storage to stylish new heights? Here’s your guide to getting started. Below are some considerations and steps that will guide you through the process of taking your wardrobe measurements. We strongly suggest drawing this space on the grid paper provided below.
How do I determine my wardrobe size? How? The total length of the wardrobe should be multiplied by the height to get the size of the wardrobe. For example, if the wardrobe is 6 feet long and 7 feet high, then the size of the wardrobe will be 42 square feet.
Similarly, What is the average wardrobe size?
Most wardrobe cabinets typically are 24 inches deep, but can be as narrow as 18 or even 12 inches in depth. Height also depends on application, but standard height is usually no more than 72 inches. Width varies anywhere from between 24 inches to more than 96 inches.
How much will my wardrobe cost?
A basic fitted wardrobe with 2 swing doors and no add-ons can cost between ₹21-25,000, while sliding doors can cost between ₹60 – 67,000.
What size is a standard double wardrobe?
These wardrobes are available in any height up to 2400mm (excl legs), any depth up to 680mm and any width up to 1200mm. ‘Standard’ dimensions are provided for price-breaks. Supplied with a fixed dividing shelf and two chrome hanging rails.
How deep are closet cabinets?
As always, you want to make sure you’re getting the best possible storage solution for your personal wardrobe. The depth of your closet cabinets and panels range from 14 inches to 24 inches. Most clothing items that are hung, including dress shirts and blouses, jackets and coats, will fit inside a 22-inch-deep area.
What is the size of a standard bedroom closet?
A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.
How narrow can a closet be?
The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.
What thickness of plywood is used for wardrobe?
Plywood White and Brown Wardrobes, Thickness: 8 & 19 mm
| Material | Plywood |
|---|---|
| Color | White, Brown |
| Plywood Thickness | 12 mm , Also available in 4, 6, 8, and 19 mm |
| Appearance | Modern |
| Warranty | 5 Year |
Which plywood is best for wardrobe?
Appearance. Appearance- The best plywood brands for wardrobes like green ply, century ply etc use high-grade veneer on the face of the sheet. This ensures that the wardrobe or furniture that is made using this features an attractive look after finishing.
How much does it cost to build a closet wall?
Installing a wall can cost $2,500-$6,100, depending on where you live, how large the new wall is, and whether the contractor needs to frame in a closet or add new electrical outlets, light switches and/or fixtures.
How many pants should a woman own?
So how many jeans you should own basically depend on how much variety in style you want in your life. You could probably get by with 3 pairs of jeans, but I generally recommend 5-6 pairs depending on how often you wear jeans at work.
What size are sliding wardrobe doors?
Each design is available in 610, 762 and 914mm, and for an opening height of 2260mm as standard, or 2275mm if opting for soft close upgrade.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How deep are shelves in a closet?
Most typical closet shelving is 14” deep, partly because that depth works well for most folded clothing but also because that dimension provides excellent yield from the typical sizes of materials that are available to closet manufacturers, which minimizes waste.
What is a good shelf depth?
The shelves shouldn’t be too deep.
The standard depth of most shelves is 16 to 20 inches deep. The highest shelf should be shallower, like 12 inches deep, to make those items easier to access. If you find that stuff seems to get pushed to the back and forgotten about, you should consider even shallower shelves.
Is 4 feet too narrow for a walk-in closet?
Walk-in closets should be a minimum of 4 feet wide by 4 feet deep. With these minimum dimensions, the closet will accommodate shelves and hanging space on one side wall and the back wall.
How small can a walk-in wardrobe be?
A standard full-size walk-in closet for two people should measure a minimum of 7 by 10 feet. … ft as this allows you to have storage units on all three walls with even a sitting area in the middle. In case you want a smaller one, small walk-ins can be built in as low as 25 sq. ft.
Which type of wood is best for wardrobe?
What are the Right Materials for My Wardrobe/Cabinet?
- Plywood. Plywood is a material manufactured from thin layers or “plies” of wood veneers that are glued together. …
- Particle Board. …
- Medium Density fiberboard (MDF) …
- Wood Plastic Composites. …
- Solid Wood.
What is the best wood to make a wardrobe?
Just from the name alone, we know that hardwoods, such as oak, are very strong and durable materials, making them great when used for wardrobes. Cheaper softwood alternatives may last only a few months, whilst oak can last for years without losing its strength.
Is blockboard stronger than plywood?
Mostly uses softwood in the core. Softwoods are soft and have low strength and hence blockboards have moderate strength. Mostly uses hardwood veneers arranged in a uniform cross-layered pattern. Plywood is much stronger than blockboard.