If you are referring to the 110 VAC power cord there is no problem as to which cord you use. However, the cables that connect from the PSU to the motherboard, devices, graphics card, etc. are not inter-changeable from one brand to another.
Just so, Can I use 4.5 V instead of 5v?
They’re very stable on the output voltage and can kick out an amp or so. It’ll work fine.
Can I use any power cord? Many power cords or leads are interchangeable within the same country and within the same family. Those that have specialized requirements tend to have interlocking devices or tabs that prevent similar cords from being used in other places. Don’t worry. If it fits, you’ll be fine.
Similarly, Are all power supply cords the same?
The device-side of all PC cables is standardized. ATX 24-pin, EPS12V, PCI-e to the GPU, SATA—the wiring is known, and it doesn’t change. What isn’t standardized, however, is the layout of the PSU-side modular cable headers. … Like ESD, just because you’ve gotten away with mixing cables doesn’t mean you always will.
Are power cables the same?
The number on the power cable determines the maximum safe voltage for that power cable. Therefore, in the US, any cable rated to 120V or higher will work fine. Now, you do have to worry about the current printed on the cable.
Can I charge a 3.7 V battery with a 5V charger?
Lithium battery with protection circuit board can be charged with 5V voltage(4.8V to 5.2V can be used). For 3.7V lithium batteries, the charge cut-off voltage is 4.2V and the discharge cut-off voltage is 3.0V. … Charging with 5V voltage is easy to cause danger of overcharging.
Can I use 19V charger for 12V?
No, don’t use it! The PSU will supply 19V (“voltage source”) and will probably damage the load. There are PSUs that limit output current by dropping/regulating the output voltage (which then can be considered a “current source”), but as long as the required current isn’t constant that wouldn’t work either.
Can I charge a 4.2 V battery with a 5V charger?
Can I charge a 4.2 V battery with a 5 V wall charger? – Quora. Yes you can, but the concern is what happens when the voltage exceeds 4.2 volts. In the case of lread acid or NiMH types nothing except a slight outgassing or mild heating, in the case of a li ion ,it could result in a fire. .
What is C13 power cord?
IEC C14 to C13 cords are the most popular type of power cord used to power equipment in a data center server rack. Sometimes referred to as Jumper Cords, C14 to C13 cords are used to connect server and network equipment power supplies to a PDU or power strip.
Can I use a 12V power supply on a 19v?
A 12V adapter is unlikely to damage the components, but it is possible depending on the design and that’s why I mentioned it. The likelihood is probably vey tiny though so you can probably ignore that bit.
What gauge is computer power supply wire?
Standard PC power cables use 18, 16, or 14-gauge wire.
Are power supply power cords interchangeable?
Fortunately, they’re all the same; if the power cable fits into the PSU then it’s the right one. Generally, there are 2 different types for computer PSUs: the C13/C14, and the C19/C20.
Are all power cords Copper?
Most power cords use stranded copper wire. Those with two-prong plugs are ungrounded power cords. They have two separate twisted wire strands with individual insulation. … Remember do this before the copper oxidize.
Can I use a DC power supply to charge a battery?
Batteries can be charged manually with a power supply featuring user-adjustable voltage and current limiting.
Can I charge a 3.7 V battery with a 4.2 V charger?
1 Answer. 3.7V is the nominal voltage of the cell. As long as the maximum voltage for the cell is 4.2V or higher and the charge current is equal to or less than the amount recommended in the datasheet (usually 0.8C or less is safe) then you can charge the cell with the charger.
Can I use a 12V power supply on a 5V?
Yes, it is possible to get 5V@10A using your existing 12V@6A Power Supply. The only thing needed is a ‘good’ Step-Down Converter (aka: Buck-Converter). Because, your existing supply can deliver up to 72W of power, with the minimum efficiency of around 70% of Buck converter, you can get 50W at the output.
Can I use a 20v adapter on a 19V monitor?
It’s best to use charger of same specification and model. 20v can be used for 19v as long as the current rating of 20v is the same or higher but only temporarily. Best to charge the battery and the then unplug and run the laptop, notebook etc on their batteries themselves to ensure the correct input to the circuitory.
Can I use a 19V power supply on a 18V?
Yes should be ok just,as you should try and keep to less than 5% difference if possible. Make sure the power output is equal to or greater than the 18V one.
Can I use a 19V adapter for 15V?
You can not however use a 15V charger on a laptop that requires 19V or vice versa. The output tip needs to match. … However, to avoid any damage to your laptop it’s usually a good idea to check the polarity against that of the laptop or your original charger.
Can a 6 volt battery be charged with a 12 volt charger?
No, there is not enough voltage provided by 6 volt charger to be able to charge a 12 volt battery. Depending on the batteries chemistry a 12 volt battery will actually have different “full” and “charge” voltages.
What voltage should I charge my 18650?
18650 lithium-ion batteries are charged up to 4.2V and down to between 2V and 3V depending on the cell’s specification for cut-off voltage. To be safe, never discharge lower than 3.0V unless you know your cell’s specification.
