Q: Does El Wire Fade? A: Under perfect conditions, the color of El Wire can last many many years, however, prolonged exposure to direct sunlight or UV light will cause the color to fade over time. … You can expect 2 to 3 years of true color from your wire when exposed to average sunlight indoors.
Just so, Can El wire be cut?
Can EL Wire Be Cut? Yes, EL Wire can be cut at any point along the line and will continue to glow to the point where it is cut. We recommend to cut at a 30° angle and immediately after cutting to apply an end cap to the wire.
Is EL Wire waterproof? EL WIRE is water resistant but should not be submersed in water or be used in high humidity applications. … You could, however, slide clear heat shrink tubing over the EL Wire for waterproof applications.
Similarly, What does EL Wire stand for?
EL Wire, also known as Electroluminescent wire, is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. Sometimes its covered with a colored plastic shell to make it appear another color.
Can EL Wire change colors?
EL Wire, because of the properties, can never truly change colors from Green to red, or blue to orange. EL Wire is made from a colored plastic tubing which cannot change colors.
How thick can you get EL wire?
EL Wire has a copper core coated with the glowing phosphor and covered with a protective sleeve. The sleeve comes in four different thicknesses: 1.5mm, 2.3mm, 3.2mm and 5mm as well as a ‘welted’ sleeve that has a thin tag running along it. All EL naturally glows light blue/ or blue/green.
Is EL wire brighter than LED?
LED strips are the clear winner in this category, as they can easily change color and brightness while EL wire and tape can only be one color and level of brightness. … LED strips require significantly more power to operate than EL wire and tape.
Is EL wire waterproof?
EL WIRE is water resistant but should not be submersed in water or be used in high humidity applications. … You could, however, slide clear heat shrink tubing over the EL Wire for waterproof applications.
What voltage is EL wire?
EL Wire typically operates in a range of internal voltage of 80-130+VAC (RMS), depending on the needs of the application. EL Wire can be operated at a wide range of frequency too – the most range from 450-3000Hz range.
How bright is EL wire?
At 3 meters, its not as bright, it appears about the same as ‘classic’ EL. Each meter of high brightness EL draws about 10-15mA at the high voltage, which means about 1.5 Watt/meter (at 100VAC).
Is EL wire bright?
The ‘high brightness, long life’ EL wire we carry is about twice as bright and has about twice the capacitance.
Are EL panels dimmable?
With the EL panels you can dim them with a Rheostat, I use a 100 omh Rheostat with a 12v power adapter with the Rheostat on the negative lead to the power module.
What is the brightest EL Wire?
As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
Can EL Wire be used outdoors?
Although EL wire has great staying power, its color will eventually fade from sun exposure. Keeping your EL wire outdoors in direct sunlight will cut the life span to one to two years. When kept indoors or with limited outdoor exposure, your EL wire’s color will last as long as three years.
How thick is El panel?
EL Panels are paper thin glowing sheets around 300 microns thick – that is 1/3 of a millimeter! It is brighter than EL Wire (about as bright as diffused LED) and can be bent and cut.
Do you need an inverter for EL wire?
Inverter / Driver Details
To power EL, an AC source is required. It is not possible to light up EL with DC such as batteries or a wall adapter! The output of the inverter must be a sine-wave with no DC component. It is not unusual to have an inverter run from batteries, such as this ‘pocket’ AA driver.
What voltage does EL wire run on?
EL Wire typically operates in a range of internal voltage of 80-130+VAC (RMS), depending on the needs of the application. EL Wire can be operated at a wide range of frequency too – the most range from 450-3000Hz range.
Which EL wire is the brightest?
As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
What voltage is EL Wire?
EL Wire typically operates in a range of internal voltage of 80-130+VAC (RMS), depending on the needs of the application. EL Wire can be operated at a wide range of frequency too – the most range from 450-3000Hz range.
How Safe Is EL wire?
Electroluminescent Wire Safety Information
Electroluminescent Wire for the most part is a very safe product. It is water resistant in its enclosed plastic housing, and uses a low operating voltage. It converts the voltage into a high frequency (around 2000Hz) which gives a slightly audible sound.
How long does laser wire last?
The cable is easy to use, lasts as long (if not longer) than your laser module (typically 7-10,000 hours) and easily replaceable.
