Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
Just so, Which toilet is better elongated or round?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
Are toilets universal size? Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. … Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Similarly, Can you replace a 12 inch rough in toilet with a 10 inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
How much space does a toilet need UK?
Minimum sanitaryware sizes
The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
Is a one piece toilet better than 2?
Performance-wise, there is no difference between the one-piece and two-piece toilets. They can have the same flushing power and efficiency. The interior parts are almost identical if they are from the same manufacturer. They may even have the same features and specifications.
What brand toilet is best?
Top Rated Toilet Brands In The Industry
- American Standard. Are you a patriot? …
- TOTO. Oh, the one and only, the ninja of toilets. …
- Kohler. …
- Duravit. …
- Niagara Conservation. …
- Sterling. …
- Jacuzzi. …
- Saniflo.
Which toilet height is best?
The ideal height for your toilet will depend on three things. Standard toilets are usually around 15 inches high at the seat. If you are a tall person, that could be too low for you. You might want to check into a floor-mounted “comfort height” toilet that is 17 to 19 inches in height or elevated toilet seats.
Will any toilet fit?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
How do I choose a toilet bowl?
Consider an elongated vs round toilet:
- Elongated toilet bowls measure up to 31-inches from the wall behind the toilet to the front of the bowl. Elongated bowls provide greater comfort while seated.
- Round toilet bowls extend up to 28-inches from the wall.
Can a round toilet be replaced with an elongated toilet?
The average length of a round-shaped bowl is 16.5 inches. Provided that the rough-in measurement is the same, you can swap an elongated toilet with a round-shaped one. However, it is impossible to substitute an elongated toilet seat with a round toilet seat.
Can you move a toilet over a few inches?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
What does 12 rough-in for toilet mean?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.
What measurements do you need to replace a toilet?
Taking Measurements
If your existing toilet has four bolts, measure to the center of the back bolts. This measurement is known as the rough-in measurement. For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches.
Is 60cm wide enough for a toilet?
Whatever sink you choose, you should allow at least 60cm between the front of the sink and the wall or any other fitting opposite for passage. A toilet hung from the wall, and with a concealed cistern, brings a sense of space to any bathroom.
What is the ideal bathroom size?
An average sized bathroom is anywhere between 36-40 square feet for an apartment or small home. This size is the general size as it encompasses both ¾ baths as well as full baths, giving you just about enough room for a shower, a bath, a sink and a toilet.
What is a Saniflo toilet?
What is a Saniflo Toilet? A saniflo toilet (also known as a macerator toilet) differs from a conventional toilet in two ways. … Secondly, instead of flushing waste through drainage in the floor, a macerating toilet system uses a centrifugal pump to flush the waste out of the toilet and into the general waste system.
Why are elongated toilets better?
Elongated bowls are also considered more ‘hygienic‘ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
Is Toto toilet better than Kohler?
When it comes to Kohler vs Toto vs American Standard, Kohler has a sound rating of 4 and Toto has a sound rating of 3 while American Standard only manages to achieve 2; making Kohler and Toto more superior when it comes to flushing noise levels. …
What are tankless toilets?
A tankless toilet does not rely on a tank of water to clear the bowl. Instead, it receives water from a supply line that has a high enough pressure behind it to force waste through the drainage system. It uses the same amount of water as the tank toilet, but the water enters the fixture at greater pressure.
What are the top 5 toilets?
Our Top 10 Toilet Reviews
- 1 – KOHLER Santa Rosa Toilet. …
- 2 – American Standard Champion 4. …
- 3 – Saniflo SANICOMPACT 48 Toilet. …
- 4 – Toto Neorest Dual Flush Toilet. …
- 5 – Kohler Wellworth Toilet. …
- 6 – Toto Washlet with Integrated Toilet. …
- 7 – Niagara Stealth Toilet. …
- 8 – American Standard H2Option Toilet.
What should I look for when buying a toilet?
While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.
Is a rimless toilet better?
Not only are rimless toilets easier to clean, they’re also more hygienic than regular toilets. … The direct flush technique used by most rimless toilets shoots water around the whole of the bowl, which cleans the pan much more effectively than a regular toilet. This means your toilet will stay cleaner after every flush.
