What drill bit is 5mm?

Drill Bit Hole Diameters
Metric Size	Fractional Size
.5 mm	. 0197	5/64
.6 mm	.0238	3/32
.7 mm	.0276	7/64

Just so, What size is #2 drill bit?

Downloadable versions:

Drill size	Diameter (in)	Diameter (mm)
2 mm	0.0787	2.0000
#46	0.0810	2.0574
#45	0.0820	2.0828
2.1 mm	0.0827	2.1000

What is 5 mm drill bit in fraction? 5mm = just over 3/16 inch. 6mm = almost 1/4 inch. 7mm = almost 9/32 inch (= a bit over 1/4 inch) 8mm = 5/16 inch.

Similarly, What can I use instead of a 5’8 drill bit?

If you break it down to 16th’s, 5/8ths is 10/16ths. So the next size larger would be 11/16th’s. If you want to stay in 1/8ths, than obviously it’s 6/8ths or 3/4″. If you break it down to 16th’s, 5/8ths is 10/16ths.

What size is a number 20 drill bit?

Drill Bit Size Chart

Size	Decimal Equivalent	Size
74	0.0225	21
. 60 mm	0.0236	20
73	0.024	4.10 mm
72	0.025	4.20 mm

What size is a 1/8 drill bit in MM?

Fractional inch drill bit sizes

Drill size	Diameter (in)	Diameter (mm)
3/32 in	0.0938	2.3813
7/64 in	0.1094	2.7781
1/8 in	0.1250	3.1750
9/64 in	0.1406	3.5719

What is 5mm in standard?

MM	Approximate Size In Inches	Exact Size In Inches
5mm	3/16 Inch	0.19685 Inches
6mm	Just short of 1/4 Inch	0.23622 Inches
7mm	Little over 1/4 Inch	0.27559 Inches
8mm	5/16 Inch	0.31496 Inches

What size hole do I drill for a 8mm tap?

Metric Tap and Drill Bit Size Table

Tap	Metric Drill	US Drill
7mm x 1.0	6.1mm	15/64″
8mm x 1.25	6.9mm	17/64″
8mm x 1.0	7.1mm	–
10mm x 1.5	8.7mm	–

How do you drill a 5’8 hole in wood?

Is slightly bigger than 5 8?

So 4/6 is equal to 16/24. Now that the denominators are the same, we can compare the two fractions by looking at their numerators. 16/24 is larger than 15/24… so 4/6 is larger than 5/8.

What size drill bit do I need for a 5’8 bolt?

To Tap This Size Screw Or Bolt:	Use This Drill Bit:	(Closest Fractional:)
5/8-11 NC	17/32″	17/ 32″
16mm-2.00mm	14.2mm	35/64″
5/8-18 NF	37/64″	37/64″
16mm-1.50mm	14.7mm	–

What size is 8mm drill bit?

Drill sizes to 1″ diameter

Drill sizes to 1″ diameter Legend Fractional Inch Letter Drill Millimeters Number Drill
Millimeters	Inches	Designation
7.8mm	.3071″
7.9375mm	.3125″	5/16″
8mm	.315″

What size is 21 drill bit?

To Tap This Size Screw Or Bolt:	Use This Drill Bit:	(Closest Fractional:)
10-24 NC	#25	5/32″
3/16-32 NS	#22	–
10-32 NF	#21	5/32″
5mm-0.90mm	4.2mm	–

What size is a number 47 drill bit?

Number Drill Sizes

Drill	Inch	mm
49	0.073	1.85
48	0.076	1.93
47	0.0785	1.99
46	0.081	2.06

How do I know what size my drill bit is?

Typical drill bits have markings somewhere on the shank above the threads. It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.

What is a 6mm drill bit?

What size is a 6mm drill bit in inches? Hi, 6mm is 0.2362198 inches. 15/64 is 0.234 inches.

What drill bit is 4mm?

Metric Tap and Drill Bit Size Table

Tap	Metric Drill	US Drill
4mm x 0.7	3.4mm	–
5mm x 0.8	4.3mm	–
6mm x 1.0	5.2mm	–
7mm x 1.0	6.1mm	15/64″

What is equivalent to a 5.5 socket?

SAE to Metric Conversion Chart

SAE	Metric	Inch
	5.5mm	0.216
7/32″		0.219
	6mm	0.236
1/4″		0.25

• Apr 29, 2020

How many inches is 5mm thick?

Convert mm to Inches

mm	Inches	Inches
5	0.20	3/16 inch
6	0.24	Just under 1/4 inch
7	0.28	Just over 1/4 inch
8	0.31	5/16 inch

How do you measure mm on a ruler?

Locate the zero end of the ruler, and then count each individual mark along the edge of the ruler. Each mark represents 1 millimeter or mm, so counting five marks is the same as counting 5 millimeters, counting 10 marks is the same as counting 10 millimeters and so on.