Hanging your curtains at ceiling level maximizes the light that shines through your window and it makes the room feel larger because the walls look taller. This works well in a small space, but may not be ideal in a room that is already too large.
Just so, How do you hang fabric on ceiling without nails?
How to Hang Fabric on a Wall Without Nails
- 1 Attaching Adhesive Velcro Strips.
- 2 Hanging Fabric with Clothespins and Velcro Strips.
- 3 Hanging Fabric with a Back Pocket on a Curtain Rod.
How far from ceiling should you hang curtains? No matter what the ceiling height, the minimum distance from the top of the window casing to the curtain rod is two inches. To create the illusion of height, mount the drapery rods close to the ceiling. This is particularly important to do if the room has low ceilings. Use these same rules when the windows are arched.
Similarly, How close to ceiling can you hang curtains?
For high ceilings, keep curtains within 8 inches from the tops of windows. Rooms with high ceilings (10 or more feet high) often have more than a foot between the window and the ceiling line or no space at all.
How far down from the ceiling should you hang curtains?
If you have the space between the top of your window frame and the ceiling or crown molding, though, you should hang the rod over the window. I like to go 3 to 5 inches down from the ceiling. Doing this visually extends the length of your wall, making your ceiling look higher.
How do you drape fabric from the ceiling?
How do you attach fabric to a ceiling?
Start in one corner and attach the fabric to the ceiling by placing small pieces of duct tape along the wall. The fabric will drape a bit, but you’ll pull it taut later. Once your first strip of fabric is taped up, start back at the first corner, fold one inch or so of the fabric so that you have a clean edge.
How do you hang something on a concrete ceiling without drilling?
Here are some ways you can hang objects from concrete ceilings without drilling:
- Use adhesive wall hooks for lightweight objects.
- Use a powder-actuated tool for angle clips and pins.
- Use hardwall hangers on concrete.
- Use tape only on smooth surfaces.
How high should drapery rods be?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Where do brackets go on curtain rod?
Curtain rod brackets should be placed at the height determined by the drapery rod, and the brackets should be marked approximately 3”- 4” from the ends of the drapery rod (usually beyond the window frame to allow for the curtains to open fully).
Where should curtain brackets be placed?
Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire window treatment will be crooked.
What length drapes for 9 foot ceilings?
For a 9 foot ceiling, pick 96-inch curtains. Typically, your curtain rod is hung about a foot from the ceiling. 96 inches covers the distance between the floor up to one foot from the ceiling.
How high is too high for curtains?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Should drapes touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
What material is used for ceiling draping?
Poly Voile is a beautiful and popular sheer ceiling draping fabric and is similar to organza however it has a 118″ width. Voile is a transparent, durable and excellent draping material. Nylon Tulle is a lightweight and transparent fabric.
How do I make a fabric ceiling canopy?
How do you attach tulle to ceiling?
Stick small hooks in the ceiling from which to hang the tulle. Use permanent anchors or self-stick as preferred. Rub each location with a cloth dampened with rubbing alcohol to ensure adhesive sticks, as applicable. Use a drill to attach permanent anchors.
Can I put fabric on my ceiling?
Choose fabrics for your fabric ceiling panels that are very lightweight, as heavy fabrics will be tiring to install and put strain on your ceiling. Tulle, gauze and lightweight broadcloth are some good choices.
How much fabric do I need to drape a ceiling?
1 Divide your measurement for the length of the area by two and multiply by 130% (1.3) to allow for fabric draping swag. This is the amount of fabric you will need for each panel for the length of the area. 2 Divide your measurement for the width of the area by two and multiply by 130% (1.3).
What is a Barrisol ceiling?
A Barrisol stretched ceiling is a non flammable sheet in PVC classified B S1-d0, B S2-d0 or B S3-d0 (depending on the finish) in Europe, Class 0 in UK and Class I in the USA which is tightened under the effect of heat on the periphery of the walls thanks to a specific track system (patented).
How much weight can a ceiling anchor hold?
Able to hold between five and 25 pounds, depending on brand and size (larger anchors hold more weight). Not suitable for use on ceiling drywall as downward pressure could cause the anchor to slip out.
How much weight can a concrete ceiling hold?
There are so many factors that determine “how much weight can a concrete roof support” that it isn’t a black and white question. When completely healthy and showing no signs of wear and tear, a concrete roof can safely support around 1,200 pounds (0.54 t) per square foot.
How do you anchor a concrete ceiling?
Simply drill a hole into the concrete, hold the fixture you’re fastening over the hole, then use a hammer to tap the anchor into the hole. As you drive in the pin, the sleeve expands outward, trapping the anchor in the hole.
